Tilta - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray

Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray

1022025
0631384550104
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tilta TA-T17-B-G - Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
Tiltaing Sony a7/a9 Series Kit B - Tilta Gray
... learn more
Visuals Price
272.90 CHF VAT excl.

295.00 CHF Inc. VAT

Made to order

Tiltaing Sony A7/a9 Series Grey Tilta Kit B
The kit provides a protective cage for your camera that incorporates 26 threaded 1/4"-20 mounting holes for accessories.
The included powered side handle accepts an L-series F570 battery and attaches to the cage, allowing you to interface with and power the Nucleus Nano motor. The top handle attaches to the cage via one of the cage's two cold shoe mounts, and it features multiple 1/4"-20 threaded mounting holes as well as a 15mm rod clamp and a cold shoe mount. The Manfrotto and ARCA compatible quick-release plates offer extended mounting possibilities, and the two bottom plates allow you to use any a7 series camera, as well as the a9, with this system.
Tilta Full Camera Cage for Sony a7/a9 series
The Tilta full cage for Sony a7/a9 series cameras is a perfectly fitted and easily assembled cage that holds your camera securely and features multiple 1/4"-20 threaded mounting holes for accessories. Two cold shoe mounts also allow accessory mounting, providing a robust frame that will not stress your camera body. The bottom plate features multiple mounting holes for attachment to a tripod or stabiliser. The multiple holes allow you to fine-tune the position of your camera on your stabiliser for more balancing options.
- This perfectly fitted aluminium and stainless steel cage is supplied unassembled and you must assemble it
- Multiple 1/4"-20 and 3/8"-16 threaded mounting holes for accessory mounting
- Two cold shoe mounts are integrated into the cage for mounting accessories such as the optional top handle
- A raised front plate prevents your camera from rotating in the cage
- The front plate features two mounting holes for optional lens adapter supports
- The front plate and rubber pads on the cage mounting surface help prevent your camera from rotating in the cage
Tilta Quick-Release Top Handle for BMPCC 4K Cage
The aluminium and stainless steel handle attaches to your camera cage using the included spring-loaded thumbscrew. The 15mm rod port features a rod locking screw to add a rod to the handle. There is a 3/8"-16 thread with locating pins at the front of the handle for mounting a Tilta cage rod support sold separately.
Tilta HDMI Cable Clamp Attachment for Sony a7 and a9 Cage
Secure the cables of your Sony a7 and a9 camera with this Tilta HDMI cable clamp attachment when your camera is mounted in the Tiltaing Sony a7 and a9 camera cage. The aluminium cable clamp attaches to the cage using the included screws, the HDMI cable is inserted, then the cable clamp is tightened with a thumbscrew to prevent cable pulls or disconnections.
Tilta HDMI to Micro-HDMI Adapter HDMI-01-M
Simplify camera connectivity with the Tilta HDMI to Micro-HDMI Adapter HDMI-01-M. It plugs into your camera's micro-HDMI port and provides a standard HDMI port to connect your standard HDMI cable. Its universal compatibility makes it easy to pass through a camera cage to connect and detach from your mounted camera.
Tiltaing Type III Side Focus Handle
Pair the versatile Tilta Tiltaing Type III side focus handle with a Nucleus Nano motor for fingertip focus control and with a Nucleus Nano R/S cable sold separately for a record start/stop button with compatible cameras. Powered by a Sony NP-F570 L-series type battery sold separately, this Tilta grey handle slides onto the base of a Tiltaing half cage or full camera cage.
This cage component features a knurled focus wheel, an 8V micro-USB output, a 12V barrel output and a rubberised surface for a secure grip.
 

 

Specifications

 

Full Camera Cage for Sony A7/A9 series

Construction Material

Aluminium alloy, Stainless steel

Accessory Mounting

26 x 1/4"-20 threaded holes,
n 2 x Cold shoe mounts

Tripod Mounting

8 x 1/4"-20 threaded holes

Dimensions

5.75 x 4.5 x 2.88" / 14.61 x 11.43 x 7.3 cm

Quick-Release Top Handle for BMPCC 4K Cage

Construction Material

Aluminium, Stainless steel

Accessory Mounting

Multiple 1/4"-20 and 3/8"-16 threads,
n 2 x Cold shoe mounts,
n 1 x 15mm rod port,
n 1 x 3/8"-16 thread with locating pins

Dimensions

5.6 x 2.8 x 0.8" / 14.3 x 7.1 x 1.9 cm

Weight

6.1 oz / 172.8 g

HDMI Cable Clamp Attachment for Sony A7 and A9 Cage

Construction Material

Aluminium, Stainless steel

HDMI to Micro-HDMI Adapter HDMI-01-M

Connector 1

HDMI Type-A Female

Connector 2

HDMI Type-D Male

Conductor Material

Copper

Type III Side Focus Handle

Construction Material

Aluminium, Stainless steel

Battery Type

1 x NP-F570 L Series Type

Output

1 x 8 VDC Micro-USB,
n 1 x 12 VDC Barrel

 

You may also like

Tiltaing Sony a7/a9 Series Kit B - Tilta Gray