Robe lighting - ROBIN TetraX/W EP in Cardboard
Robe lighting 10071512 - ROBIN TetraX/W EP in Cardboard
1075818
Need something exceptional to stand out? Something very different to create a powerful signature effect. Are you missing that X factor? Then push it to the extreme with the sensational TetraX™!
Developed from the highly successful Tetra1™, the TetraX™ adds dynamic pan movement with extremely fast continuous rotation, greatly increasing the device's sweeping effect possibilities.
Generating an ultra-tight 4° beam from each of the 9 evenly spaced pixels, they combine to produce a bright and defined "sheet" of light, as desired by lighting designers. The homogenised beams and smooth 11:1 motorised zoom provide ultra-smooth washes up to 45°.
The TetraX™ stands out by including three exclusive Robe patented MCFE™ (Multi-Coloured Flower Effect) effects, emitting sharp, multicoloured points of light, with variable speed and rotation direction control, to further enhance the projection of charismatic animations in the air.
Full colour and dimming control is available via RGBW and CMY colour mixing modes; variable CCT from 2,700K to 8,000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2,700K to 4,200K; DataSwatch™ colour library with 237 pre-programmed colours; L3™ Low Light Linearity dimming software for imperceptible fades to black.
An Epass™ Ethernet switch ensures continuous network connectivity. A wide range of protocols (sACN, Art-Net or Kling-Net) allows quick network setup and control from media servers, DMX, or the internal effects engine.
Developed from the highly successful Tetra1™, the TetraX™ adds dynamic pan movement with extremely fast continuous rotation, greatly increasing the device's sweeping effect possibilities.
Generating an ultra-tight 4° beam from each of the 9 evenly spaced pixels, they combine to produce a bright and defined "sheet" of light, as desired by lighting designers. The homogenised beams and smooth 11:1 motorised zoom provide ultra-smooth washes up to 45°.
The TetraX™ stands out by including three exclusive Robe patented MCFE™ (Multi-Coloured Flower Effect) effects, emitting sharp, multicoloured points of light, with variable speed and rotation direction control, to further enhance the projection of charismatic animations in the air.
Full colour and dimming control is available via RGBW and CMY colour mixing modes; variable CCT from 2,700K to 8,000K; tungsten emulation simulating the red shift and thermal delay of tungsten lamps for whites from 2,700K to 4,200K; DataSwatch™ colour library with 237 pre-programmed colours; L3™ Low Light Linearity dimming software for imperceptible fades to black.
An Epass™ Ethernet switch ensures continuous network connectivity. A wide range of protocols (sACN, Art-Net or Kling-Net) allows quick network setup and control from media servers, DMX, or the internal effects engine.
|
|
Specifications |
|
| Light source | 9x 40W RGBW multichip LEDs | |
| Light output | 5,300 lm (integrating sphere) | |
| Zoom range | 4° - 45° | |
| Effects | 3x MCFE™ Multi-Coloured Flower Effects (patented), pixel control, continuous pan rotation | |
Loading...