Sony DWT-B03R/L - Digital Belt-Pack Wireless Trasmitter
2,337.12 CHF Inc. VAT
-
Delivery
- Shipped in 1 to 2 weeks
-
In-store pickup
- Available in 1 to 2 weeks
The Sony DWT-B03R Digital Wireless Transmitter: Superb audio quality and stable operation across a wide range of environments
Key features:
- Up to 148 MHz bandwidth
- 2 mW, 10 mW and 25 mW
- Small, lightweight and robust magnesium housing
- Weight: approximately 99 g
- Dimensions: 53 mm x 60 mm x 17 mm (antenna not included)
- Up to 7 hours battery life
- NP-BX1 lithium-ion rechargeable battery
- Phase shift
- Sony High Definition Audio Codec 4
- Cross Remote for full RF control
- Lemo 3-pin
- OLED display
Small, lightweight and durable
At only 53 mm x 60 mm x 17 mm (antenna not included), the DWT-B03R is incredibly small and lightweight. It also features a robust magnesium housing resistant to rain, splashes and perspiration.
Wide bandwidth, more channels per band
The DWT-B03R is ideal for use in large-scale multi-channel productions. Its 148 MHz bandwidth per pack means the bandwidth is almost doubled compared to previous versions. The DWX3 supports up to 21 simultaneous channels per 8 MHz TV band.
Extreme stability and low latency
Sony's advanced digital audio processing, encryption and RF transmission technologies ensure secure and stable transmission and reception of very high-quality sound with low latency.
Control 82 transmitters remotely
New battery power and OLED display
The DWT-B03R transmitter uses Sony's NP-BX1 Li-Ion battery and charges via the BC-DWX1 battery charger, equipped with PoE (Power over Ethernet) capabilities. Over 7 hours. Easily available worldwide — low cost. Navigation through the on-board menu system and control of the unit's parameters are made easier by the incorporation of a high-resolution OLED display offering superior clarity and reduced overall power consumption. The battery provides up to 7 hours of use.
|
|
Specifications |
|
|
Wireless interface |
WiDIF-HP |
|
|
Oscillator type |
Quartz PLL synthesiser |
|
|
Antenna type |
Flexible λ/4 wire |
|
|
Emission type |
G1E or G1D |
|
|
Carrier frequencies – UC |
UC: 470.125 MHz to 607.875 MHz, 25 kHz steps |
|
|
Carrier frequencies – CE7 |
L: 470.025 MHz to 614.000 MHz, 25 kHz steps |
|
|
Carrier frequencies – J |
L: 470.150 MHz to 614.000 MHz, 25 kHz steps |
|
|
RF power |
2 mW/10 mW/25 mW (e.i.r.p.) selectable |
|
|
Input connector |
3-pin mini connector |
|
|
Reference input level |
MIC: -60 dBV (-58 dBu), 1 kHz (at 0 dB attenuator level) / LINE: +4 dBu, 1 kHz |
|
|
Maximum input level |
MIC: -22 dBu (with 0 dB attenuator), LINE: +24 dBu |
|
|
Audio attenuator adjustment range |
0 to 48 dB (3 dB steps, MIC input mode only) |
|
|
Frequency response |
Transmission: 20 Hz to 22 kHz (typical) |
|
|
Dynamic range |
106 dB typical (A-weighting, T.H.D=1%) |
|
|
Distortion (T.H.D) |
MODE1, MODE2: 0.03% or less, MODE3: 0.3% or less |
|
|
Audio delay |
MODE1: 0.9 ms (total: 2.8 ms) /MODE2: 0.7 ms (total: 1.2 ms)/MODE3: 1.8 ms (total 3.7 ms) |
|
|
Wireless remote control |
Cross Remote (IEEE802.15.4 compliant 2.4 GHz) |
|
|
Screen |
OLED |
|
|
Power supply |
DC 3.6 V (with rechargeable battery: NP-BX1) |
|
|
Operating temperature |
0°C to 50°C / 32°F to 122°F |
|
|
Storage/transport temperature |
-20°C to +60°C / -4°F to +140°F |
|
|
Dimensions (W x H x D) |
Approximately 53 x 60 x 17 mm (60 x 60 x 17 mm with protruding parts) (antennas not included) |
You may also like