BALANCED DAYLIGHT COLOUR TEMPERATURE (CRI greater than 90) The Super LED F7 is a high-power Fresnel spotlight protected against rain by DE SISTI and includes: - the optical system internationally patented by De Sisti for LED FRESNELS and plano-convex optics. - It is available in Correlated Colour Temperature (CCT) versions balanced for Tungsten (3,200°K) or Daylight (5,600°K), both with a CRI greater than 90 and in manual or pole-operated versions. - It uses a 160W high CRI COB LED array. - The luminaire is rated IP23 and is ideal for outdoor work, it can be used in the RAIN and has been tested to operate at an ambient temperature of minus 20° C. - It is controlled by DMX from 0 to 100% with a super smooth dimmer and negligible colour temperature variation when controlling light intensity. - The lighting performance of the Tungsten-balanced CCT is similar, from medium to full flood, to that of a 1.2kW tungsten Fresnel, whilst the Daylight-balanced CCT is equivalent to 575W. The luminaire combines classic SPOT/FLOOD beam control over a FOCUS RANGE equivalent to a conventional lamp Fresnel, with excellent barn door cut-off. It uses standard accessories from the DE SISTI range of equivalent Fresnel lens size, such as barn doors, colour frame, snoots, scrims. FEATURES - High-quality, shock-resistant borosilicate glass Fresnel lens, 175 mm (7") diameter on spring mounts, with spiral prism design and optimal photometric performance - Robust and lightweight carbon steel housing with black anti-glare epoxy coating, with double internal walls and reinforcements. - High-efficiency self-stabilising active cooling: Automatic thermal stabilisation of the LED operating temperature is managed by an internal thermal sensor and CPU, a variable speed fan and a heat sink to maintain the constant temperature of the LED array at a maximum of 65°C. The hydrodynamic bearing fan operates quietly at very low speed. - Special patented optics for LED technology. - Steel cable-driven focus mechanism that guides the Teflon rings supporting the LED ENGINE along 2 rods. This ensures smooth operation during focusing, in any tilt position of the luminaire. The Teflon rings also provide a wiping action that cleans the steel guide rails during focusing. The focus mechanism can be activated at the front and rear of the luminaire and the entire spot to flood action is accomplished with 1.5 turns of the focus knob. - The unit is equipped with a hinged lens door with protective grille, it includes accessory holders. One of the 4 holders has a locking button and is spring-loaded, it can be locked either to securely hold barn doors, colour frame and scrims, or rotated 90° and locked in the open position for quick accessory changes. A double-safety accessory holder with spring latch is available on request to be assembled opposite the locking button. - Accessories are secured regardless of the luminaire's orientation. Accessories have been designed for one-handed installation. Available with positive-locking manual yokes for comfort and ease of handling, or pole-operated yokes that can be used via the lighting pole for panning and tilting the lights as well as manually, with mechanical activators equipped with clutches. Specifications - Power to LED: 160W Direct current to LED (flicker-free) - Power consumption: 180W 90-240V ; 50-60Hz PFC 0.96 - DMX data link USITT DMX512-A: This product uses a 5-pin XLR for DMX input and output ; Use shielded data cables ; Do not overload the daisy chain. Up to a maximum of 32 devices can be used on a single DMX chain. - DMX channels: 1 in 8-bit: Dimmer ; 2 in 16-bit: Dimmer - LED ARRAY lifespan: 50,000 hours with 70% lumen maintenance. LED ARRAYS are tested and certified up to LM80 - Protection type: IP 23 (Rain protection) - Maximum housing surface temperature: 70° C - Luminaire weight: 9.1 kg - Barn door weight: (8 leaves) 0.85 kg - Barn door ring size: Ring diameter 190 mm ( 7"1/2 ) - Colour frame weight: 0.13 kg - Scrim & colour frame size: Accessory diameter 185 mm (7" 1/4) - Lens diameter: 175 mm. Special short focal length spiral Super LED "F7 D" - high power CRI>90 CCT Daylight, P.O. LED Fresnel spotlight comprising: - Mod. "F7D".POH IP20 LUMINAIRE HEAD P.O. version with - 175 mm (7") diameter spiral Fresnel lens - PANEL-MOUNTED POWERCON INPUT & OUTPUT CONNECTOR PANEL. - PANEL-MOUNTED 5-PIN XLR DMX INPUT & OUTPUT CONNECTORS. - 160W high power LED CRI>90 with Correlated Colour Temperature (CCT) balanced for Daylight - Integrated UNIVERSAL power supply 90-240V 50/60Hz DMX controlled, PFC 0.96 - Mod. 5403.135 Detachable 3m blue POWERCON power cable with bare ends - Mod. 311.110.40 P.O. yoke with 28.57 mm (B.S. 1 1/8") spigot, with upper end for "C" hook - Mod. 316.100 Four-leaf rotating barn doors - Mod. 317.100 Colour frame Note: DMX cable is not included, to be ordered separately