Chrosziel 565-06-KIT-19-SW - Swing-Away MatteBox Kit MB 565 Triple 19

1017218
4250618840000
Chrosziel 565-06-KIT-19-SW - Swing-Away MatteBox Kit MB 565 Triple 19
Chrosziel 565-06-KIT-19-SW - Swing-Away MatteBox Kit MB 565 Triple 19
Swing-Away MatteBox Kit MB 565 Triple 19, for Cine FullFrame cameras
... learn more
Visuals Price
2,601.45 CHF VAT excl.

2,812.17 CHF Inc. VAT

Manufacturer price 2 890,50 CHF VAT excluded
Made to order
  • Delivery
    • Shipped in 1 to 2 weeks
  • In-store pickup
    • Available in 1 to 2 weeks
Chrosziel MB 565 Triple 19 Swing-Away Matte Box Kit
The Chrosziel MB 565 Triple 19 Swing-Away Matte Box Kit is designed for use with full-frame cinema cameras. The kit consists of a 150 mm diameter clamp adapter, a 19 mm rod swing-away arm, a French flag, three 5.65 x 5.65"/4 x 5.650" filter holders, a pivot mechanism set, a side flag set, a handle rosette set, an accessory bar with adjustable slider, a filter holder retainer, a FlexiBellows and a case with insert.
Chrosziel 19 mm swing-away arm set for Cine.1 Matte Box
The Chrosziel 19 mm swing-away arm set enables faster lens changes by easily moving the matte box out of the lens path. In addition to providing swing-away functionality, the set features articulated joints that allow you to tilt the matte box as well as slide it horizontally and vertically when adjusting to your lens, thus compensating for any inconsistencies encountered in complex mounting scenarios.
Chrosziel top flag for Cine.1 Matte Boxes
The Chrosziel top flag attaches directly to the Cine.1 matte box to block stray light from above. The flag folds in half to reduce bulk during storage. Additionally, the flag features safety holes that interlock with the matte box safety latches, preventing the flag from accidentally falling off during installation.
5.65 x 5.65" filter holder Chrosziel for Cine.1 Matte Box
This Chrosziel replacement filter holder can accommodate either a 5.65 x 5.65" filter or a 4 x 5.65" filter in one filter stage of the Cine.1 matte box.
Chrosziel side flag pivot mechanism set for Cine.1 Matte Box
Install side flags on your Cine.1 Matte Box with this Chrosziel side flag pivot mechanism set. Using the supplied screws, the pivot mechanisms attach to the left and right sides of the matte box and feature thumb screws to hold the side flags. Each pivot mechanism allows lateral adjustment of the side flags to compensate for focal length.
Chrosziel extra-wide side flags for Matte Box
The Chrosziel extra-wide side flags add light control to certain matte boxes in the presence of powerful light sources such as the sun and high-power spotlights. This side flag will block light sources and prevent reflections and flare from ruining your image.
Adjustable
This side flag allows additional adjustment via angular edge control; this control will work with wide-angle lenses and 16:9 image formats, providing specific light control.
Chrosziel top accessory bar for Cine.1 Matte Box
Mount accessories on top of your Cine.1 matte box with the Chrosziel top accessory bar. The bar itself slides into the top of the Cine.1 matte box and provides 1/4"-20 and 3/8"-16 threaded holes for mounting articulated arms or other accessories. The top of the bar features a sliding accessory mounting thread for attaching distance measuring equipment.
Chrosziel filter holder retainer for Cine.1 Matte Box
This Chrosziel filter holder retainer attaches to the bottom of the Cine.1 matte box and extends to prevent filter holders from accidentally falling through the matte box during loading.
Chrosziel FlexiBellows 150 mm for MB 565 MatteBox
The Chrosziel FlexiBellows is a 150 mm rubber retaining ring with a flexible rubber bellows of approximately 35 mm, designed to fit lenses with diameters between 70 and 110 mm. This lens retaining ring is compatible with the MB 565 MatteBox.
Chrosziel hard case for Cine.1 Matte Box
Protect your Cine.1 Matte Box with this Chrosziel hard case. A pre-cut insert is moulded for the Cine.1 Matte box for added security. Two locking latches secure the lid against drops and protect the interior from the elements. The case handle features a rubber grip for comfort when carrying by hand.
 

 

Specifications

 

19 mm swing-away arm set for Cine.1 Matte Box

Rod spacing

19 mm Studio Standard

Adjustment

Horizontal/vertical shift ±5 mm
Forward/backward tilt

5.65 x 5.65" filter holder for Cine.1 Matte Box

Filter sizes

5.65 x 5.65"
4 x 5.65"

Top accessory bar for Cine.1 Matte Box

Threaded holes

5 x 3/8"-16
4 x 1/4"-20

FlexiBellows 150 mm for MB 565 MatteBox

Compatibility

MB 565 MatteBox

Hard case for Cine.1 Matte Box

Dimensions

15 x 12 x 7" / 390 x 310 x 170 mm

 

Swing-Away MatteBox Kit MB 565 Triple 19, for Cine FullFrame cameras