Neumann - 2x KH 80 DSP + 1x KH 750 + 1x MA 1

Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1

1043931
4044155257229
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Neumann Monitor Alignment Kit 3 EU - 2x KH 80 DSP + 1x KH 750 + 1x MA 1
Calibrate your Neumann monitoring system using this Monitor Alignment Kit, which provides two KH 80 DSP studio monitors, one KH 750 subwoofer, and an MA 1 measurement microphone.
... learn more
Visuals Price
2,812.21 CHF VAT excl.

3,040.00 CHF Inc. VAT

Manufacturer price 2 960,22 CHF VAT excluded
Made to order
  • Delivery
    • Shipped in 1 to 2 weeks
  • In-store pickup
    • Available in 1 to 2 weeks

Neumann 3 EU Monitor Alignment Kit - 2x KH 80 DSP + 1x KH 750 + 1x MA 1

Equip your studio with a precisely calibrated monitoring system using the Neumann 3 monitor alignment kit, which includes two grey KH 80 DSP studio monitors, a KH 750 DSP subwoofer and an MA 1 measurement microphone. The included calibration software, developed with Fraunhofer IIS, allows you to create a room-specific profile that manages frequency, time alignment and amplitude issues inherent to your listening environment. After running the software with the included measurement microphone, your KH series 2.1 monitoring setup should be optimised to provide you with the ideal response for critical listening, mixing, post-production and more.
Neumann KH 80 DSP 4" + 1" 2-Way Active Studio Monitor (Grey, Unit)
The Neumann KH 80 DSP grey is a 2-way active studio monitor well-suited for nearfield monitoring and multichannel setups in music studios, broadcast centres and OB vans, as well as home studios and desktop audio applications. The KH 80 uses two amplifiers (120W and 70W) to drive the 4" woofer and 1" tweeter respectively, an onboard DSP engine, a mathematically modelled dispersion (MMD) waveguide, analogue input and a wide range of optional mounting hardware. The DSP function is accessible via a standard IP network connection that allows the monitoring system to be controlled using the Neumann.Control app, which runs on a Windows/Mac computer or iOS/Android tablet. Through the use of the latest acoustic and electronic simulation and measurement technologies, the KH 80 can be used in various acoustic conditions with any source equipment and in a wide variety of physical locations, ensuring accurate sound reproduction.
-Configuration: -1, 2, 4, 5, 7 and 9 speakers
-Identify speakers on the network that are in the room
-Assign identified speakers to positions in the room
-Align: Guided alignment: A process where you are asked very simple questions about the room and speaker position, then the app adjusts each speaker's response accordingly
-Manual alignment: 8-band parametric equaliser for expert users.
-Expert users have complete freedom to adjust an 8-band parametric equaliser, levels and delays in each speaker as they wish.
-Manual alignment can also be used to edit guided alignments in more detail
-Usage:
-System and alignment selection
-Volume control, preset levels, attenuation, mute of all groups, solos, mutes
-Other system settings such as delay, standby level and logo brightness -1" internally modelled tweeter with alloy fabric dome -Latest modelling techniques used to minimise non-linear distortion (harmonic and intermodulation)
-Low-distortion high-frequency reproduction -Powered by a high-efficiency 70W amplifier
-Elliptical mathematically modelled dispersion (MMD) waveguide
-Smoother off-axis response
-More tolerant of diverse acoustic environments
-Wide horizontal dispersion
-Freedom of movement at the mixing console
-Narrow vertical dispersion
-Reduces reflections from the mixing console
-Two-colour + dimmable Neumann logo
-Displays operating status and extended protection system activation
-Dimmable for low-light conditions or behind-screen applications
-Internally modelled long-throw composite sandwich cone 4" bass driver with extremely linear force factor (ELFF), magnetic shielding and flow-optimised die-cast basket
-Break-up mode damping provides low distortion at high sound levels
-Linear pistonic motor gives very low harmonic distortion even at high excursions
-Reduced air noise and improved rocking modes
-Powered by a high-efficiency 120W amplifier
-Robust metal grilles
-Protects against mechanical damage
-Large high-capacity bass-reflex ports optimised for flow with pipe resonance damping
-Fast bass transient response
-Reduced bass compression at high output levels
-No colouration due to pipe resonance
-Easier to mount in confined spaces
-Compact polycarbonate composite enclosure
-Robust assembly for long service life
-No standing wave resonances
-Single-piece front panel with no discontinuities
-Reduced diffraction and smoother frequency response -Standby function
-Reduces power consumption when product is not in use
-Control function
-Use rear panel controls or control set defined by Neumann.Control software
-4-position bass-mid acoustic control
-Compensates for nearby desks
-Quick acoustic setup in mobile applications
-Reproducible acoustic settings after moving speakers
-Wide-range input gain and output level controls
-Easier interface with signal sources
-Extensive fully documented mounting hardware range
-More flexibility in mounting speakers in more varied locations and compatibility with previous products
-Easy advanced planning for installations
-Universal double-isolated switching power supply (100 to 240V)
-Single version works in all countries and is robust against poor mains power quality
-Ground loops are impossible
-Network connector using standard IP protocol and your existing network infrastructure
-No additional special equipment required
-Speaker system can be controlled via Neumann.Control software
-Analogue input socket can accept XLR or 6.3mm (1/4") jack plugs, electronically balanced with fully symmetrical internal signal chain
-Fully symmetrical internal signal routing minimises noise caused by external electromagnetic interference
-Production consistency through automated computer-optimised alignment during final testing
-Any KH 80 DSP is matched to any other KH 80 DSP
-Separate fast-acting thermal limiters for woofer and tweeter to protect voice coils and power amplifiers
-Soft clipping and woofer excursion limiters
-Fast action and very reliable
-Allows maximum performance to be extracted
-Low heat dissipation amplifiers with large headroom and overheating limiting
-Improved transient response
-Reliability and safety assured
-8 precision alignment acoustic controls accessible via control network
-Precise and flexible speaker alignment in room and within systems
-Delay (0 to 70 ms) -Lip sync: To align audio and video signals up to 1.75 frames at 50 Hz or 2.1 frames at 60 Hz
-Flight time: To compensate for listening distance differences up to 24 m (79 feet)
-Linear phase crossover filter
-Flat phase response for temporal transparency
Neumann KH 750 Compact DSP-Controlled Closed Subwoofer
Designed to complement small rooms and small studio monitoring systems, the Neumann KH 750 is a DSP-powered 10" subwoofer capable of reproducing 18 to 300 Hz at sound pressure levels of 105 dB. This model provides a flexible 2.0/0.1 bass manager, allowing the subwoofer to be implemented in many different scenarios. Use the KH 750 for the LFE channel in a 5.1 setup or as a subwoofer in a conventional stereo mixing position. The KH 750 can be easily integrated with the Neumann monitor range and is suitable for use in mixing, mastering, music and broadcast. The KH 750 has several options on the rear panel to suit various configurations, such as four different routing modes. Analogue and digital inputs/outputs are available, as well as fourth-order DSP crossover filters and acoustic controls to integrate the subwoofer into your room. Using the RJ45 connection, you can use Neumann.Control, which runs on a standard IP network and provides controls for the KH 750 not available on the physical subwoofer itself. These controls make it easier to configure, align and use the subwoofer in your system, even in small spaces. The Neumann.Control software can be controlled using your computer or an iPad. Use the KH 750 to complement your small studio monitoring installation, and in doing so, relieve your existing monitoring system of bass extension. By implementing this subwoofer, you will also notice a marked decrease in harmonic and intermodulation distortion from your main monitors, as this load has now been relieved. A pleasant side effect will be the ability to increase the overall sound pressure level of your speakers, thus allowing you to check how the mix sounds at higher levels without inducing distortion.
Key Features
-Reduces bass extension of monitoring system
-Increases maximum sound pressure level of speakers
-Reduces harmonic and intermodulation distortion of speakers
-Reproduces LFE channel
-Reproduces subwoofer signal from multichannel source with bass management
-Creates plane wave network system for bass
-Functions as extension for KH 810, KH 870 and KH 805 subwoofer systems
Neumann MA 1 Monitor Alignment Microphone and Calibration System
The Neumann MA 1 monitor alignment microphone and calibration system is designed to help engineers, musicians and producers achieve more accurate and sonically consistent mixes from their Neumann KH 80 DSP monitors or non-DSP KH series monitors when used with the KH 750 DSP subwoofer. The system uses an omnidirectional measurement microphone and downloadable software for Mac and Windows with Fraunhofer IIS algorithms to calibrate and adjust the phase and amplitude of speakers to compensate for room imperfections. The system is easy to use; simply connect the balanced outputs of your audio interface or monitor controller to your KH monitors. Connect the Ethernet ports of your DSP-based monitors to a network switch (available separately) then route the switch output to your computer. Plug the calibration microphone into a mic input on your interface (48V phantom power required) and follow the calibration process in your software. An SG105 microphone clip is included to mount the microphone on a stand. The MA 1 software algorithms use the measurements to adjust speaker settings to a room-specific target curve that compensates for the room's acoustic defects. All correction parameters are stored in the DSP speaker, so they are always there without having to worry about plug-ins and driver issues. Additionally, once calibrated, you will no longer need the Ethernet connection. As mentioned, you can also calibrate non-DSP KH monitors, as long as you also use a KH 750 DSP subwoofer. The KH 750 DSP has enough processing power to align the entire system, including the two analogue speakers connected to its outputs. The KH 120, KH 310 and KH 420 speakers benefit from linearisation of their built-in crossover filters for more clarity, tighter bass and more accurate time correction.
Compatible DSP Speakers
The KH 80 DSP speakers and KH 750 DSP subwoofer are network compatible and can be controlled directly by the software Compatible Analogue Speakers
The following speakers are not network compatible and must be connected via a network-compatible subwoofer to be included in the system configuration: KH 120 A, KH 120 D, KH 310 A, KH 310 D, KH 420/KH 420 + DIM 1  

Features of the Neumann KH 80 DSP 4" + 1" 2-Way Active Studio Monitor (Grey, Unit)
 

 

Specifications

 

Studio monitor

  
Monitor type 2-way active
Speaker Bass-Reflex, Shielded
Speakers LF Speaker: 1 x 4" / 101.6 mm Composite Cone
HF Speaker: 1 x 1" / 25.4 mm Tweeter
Amplification LF Amplifier: Rated power of 90 W / 120 W peak
HF Amplifier: Rated at 50 W / 70 W peak

Performance

 
Frequency Range 53 Hz to 21 kHz ± 6 dB
57 Hz to 21 kHz ± 3 dB
Maximum Sound Pressure Level (SPL) 108.8 dB
Dynamic range 114 dBA
Maximum Input Level +24 dBu (Balanced)
Sensitivity/Analogue Input Gain 0 dB to -15 dB (Variable in increments)
Protections and limitations Excursion Limiter, Peak Limiter, Soft Limiter, Thermal Protection

Signal Processing

 
Equaliser 1 x Low-Mid Shelf dB

Filter

 
Crossover Frequency Low cut-off frequency: 1.8 kHz, Slope of 48 dB/Octave

Connectivity

 
Audio I/O 1 x Balanced Analogue Input Combo XLR-jack 6.35 mm female
USB and Network I/O 1 x RJ45 (Network)

Power Supply

 
AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 180 W (Maximum)

Environment

 
Operating Temperature 50 to 104°F / 10 to 40°C
Storage Temperature -13 to 158°F / -25 to 70°C

General

 
Mounting points 2 x M6 (Rear panel)
Dimensions (L x H x D) 6.1 x 9.2 x 7.6" / 154 x 233 x 194 mm
Weight 4.1 kg / 9.0 lb  
Packaging Information  
Package Weight 4.35 kg
Box Dimensions (L x W x H) 35.56 x 27.94 x 24.64 cm
 

Features of the Neumann KH 750 DSP-Controlled Compact Sealed Subwoofer

 

Specifications

 

Studio monitor

  
Monitor type Active Subwoofer
Speaker Closed, shielded
Nominal Power 256 W
Speakers Low Frequency Speaker: 1 x 10" / 254 mm Woofer

Performance

 
Frequency Range 18 Hz to 300 Hz
Frequency Response 18 Hz to 800 Hz ± 6 dB
Maximum Sound Pressure Level (SPL) 105 dB
Dynamic range 119 dBA
THD+N < -100 dB (Analogue)
< 90 dB (Digital)
Maximum Input Level #ERROR!
Sensitivity/Analogue Input Gain #ERROR!
Self-generated Noise Less than 20 dBA (at 7.62 cm / 3")
Phase Adjustment Phase inversion 0 / 180°
Protections and limitations Limiter, peak limiter, thermal limitation
RRMC 56 dB

Signal Processing

 
Equaliser 1 x LF Shelf dB
1 x HF Shelf dB
Filters 1 x Low-pass

Filter

 
Crossover Frequency 80 Hz
Crossover Filter Type Active

Connectivity

 
Audio I/O 2 x Balanced Analogue Inputs XLR female
2 x Balanced Analogue Output XLR male
1 x AES/EBU Digital Input BNC female
1 x AES/EBU Digital Output BNC female
USB and Network I/O 1 x RJ45 (Controller)

Power Supply

 
AC Input Power 100 to 240 VAC, 50/60 Hz
Power Consumption 410 W (Maximum)

Environment

 
Operating Temperature 50 to 104°F / 10 to 40°C
Operating Humidity 0.9
Storage Temperature -13 to 158°F / -25 to 70°C

General

 
Enclosure Material Aluminium, Wood
Dimensions (L x H x D) 33 x 38.3 x 38.3 cm / 13 x 15.1 x 15.1" (Each)
Weight 19.5 kg (Each)
Packaging Information  
Package Weight 21.69 kg
Box Dimensions (L x W x H) 51.05 x 49.02 x 39.37 cm
 

Neumann MA 1 Monitor Alignment Microphone and Calibration System Features

 

Specifications

 

Microphone

 
Format Stand/boom mounting
Sound Field Mono
Operating principle Pressure operation
Capsule 1 x Electret Condenser
Directivity Omnidirectional
High-pass filter None
Gain adjustment Yes
Windshield Foam (Available separately)

Performance

 
Frequency Range 20 Hz to 20 kHz
Maximum SPL 132 dB SPL
Impedance 50 Ohms
Load impedance 1000 Ohms
Sensitivity 30 mV/Pa
Signal-to-Noise Ratio 67 dB A-weighted
Equivalent Noise Level 27 dB A-weighted
THD 0.5%

Connectivity

 
Output Connectors (Analogue) 1 x XLR 3-pin male (on microphone)
Headphone Connector None

Power Supply

 
Operating Voltage 48 V ± 4 V
Operating Current Consumption 3 mA

Physical

 
Colour Black
Mounting Microphone clip (Included)
Operating Temperature 32 to 158°F / 0 to 70°C
Operating Humidity 0.9  
Storage Temperature -20 to 70°C
Dimensions ø : 0.9 x L : 4.6" / ø : 23 x L : 117 mm
Weight 37 g

Packaging Information

 
Package Weight 0.19 kg
Box Dimensions (L x W x H) 17.78 x 9.53 x 9.53 cm



 
Calibrate your Neumann monitoring system using this Monitor Alignment Kit, which provides two KH 80 DSP studio monitors, one KH 750 subwoofer, and an MA 1 measurement microphone.