The RB-PA2 is a dual stereo phono preamplifier with RIAA equalisation. This turntable preamp amplifies the low signal from your cartridge (moving magnet or high output moving coil) and provides the necessary RIAA equalisation for vinyl records, to match it to a line input on your mixing console or amplifier. It uses a clean RIAA response, making it ideal for use with broadcast turntables and DJ decks, as well as for archiving vinyl records to CD for high-quality transfers, or for converting albums to mp3.nnIt works with phono cartridges having a nominal output of 1 mV to 25 mV and has been specifically tested to work with the Technics SL-1200™ and 1210™ range of turntables. High-quality components have been used with low noise, fast-acting operational amplifiers to produce a superbly transparent signal path. Additionally, the RB-PA2 operates without a rumble filter to produce a powerful bass response.nnThe RB-PA2 is a dual stereo unit allowing up to two turntables to be interfaced. The inputs are phono connectors with Neutrik XLR connectors for the balanced outputs, which can be wired unbalanced if required. The output gain is individually adjustable for left and right channels over a range of 35 dB to 65 dB using pre-set potentiometers. The frequency response is maintained to 0.5 dB of the RIAA curve and noise is typically better than -84 dB RMS A-weighted at 40 dB gain.