Symetrix - xIn 12
Symetrix 80-0086-B - xIn 12
3,327.31 CHF Inc. VAT
-
Delivery
- Shipped in 2 to 3 weeks
-
In-store pickup
- Available in 2 to 3 weeks
Extend analogue I/O with Dante. For use with Symetrix Radius, Prism and Edge DSPs, Symetrix Dante I/O extensions use Composer for configuration. Using Composer eliminates switches, PCB jumpers and mechanical adjustments as well as the need for third-party software applications.
Features
- Built-in network switches. Direct connections to Radius, Prism and Edge DSPs.
- Internal power supplies.
- xIn 12 – 12 analogue microphone/line inputs.
- Designed for use with Dante-compatible Symetrix DSPs
- Software configuration via Composer
- Cost-effective solution to increase system analogue I/O capacity
- Ultra-low latency – No audible delay
- Premium specifications
|
|
Specifications |
|
|
General |
|
|
|
Sampling frequency |
48 kHz, ± 100 ppm. |
|
|
Frequency response (A/D) |
20 Hz – 20 kHz, ± 0.5 dB. |
|
|
Channel separation (A/D) |
> 111 dB @ 1 kHz, +24 dBu. |
|
|
Dante cable |
CAT6 standard, maximum length between devices = 100 metres. |
|
|
Connectors |
3.81 mm terminal blocks. |
|
|
Number of inputs |
Twelve (12) balanced inputs switchable between microphone or line level. |
|
|
Nominal input level |
+4 dBu with 20 dB headroom. |
|
|
Maximum input level |
+23 dBu. |
|
|
Microphone preamplifier gain |
0, 11.8, 24, 44 or 54 dB switchable. |
|
|
Microphone preamplifier equivalent input noise |
< -127 dB with a source impedance of 150 Ohms. |
|
|
Input impedance |
8k Ohms balanced, 4k Ohms unbalanced. |
|
|
Phantom power (per input) |
+48 VDC @ 10 mA maximum. |
|
|
Dynamic range |
> 116 dB, A-weighted. |
|
|
THD + Noise |
< -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain. |
|
|
Latency |
0.28 ms |
|
|
Mechanical data |
|
|
|
Space required |
1U (WDH: 48.02 cm x 24.13 cm x 4.37 cm / 18.91 in x 9.5 in x 1.72 in). Depth does not include space for connectors. Allow at least 7.62 cm (3 in) of additional clearance for rear panel connections. Additional depth may be required depending on your specific cabling and connections. |
|
|
Electrical |
100–240 VAC, 50/60 Hz, 25 Watts maximum, universal input. No mains voltage switch required. |
|
|
Ventilation |
The recommended maximum ambient temperature for operation is 30°C / 86°F. Ensure that the left and right sides of the equipment are not obstructed (minimum clearance of 5.08 cm, 2 inches). Ventilation must not be impeded by covering the ventilation openings with objects such as newspapers, tablecloths, curtains, etc. |
|
|
Certifications and compliance |
UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS. |
