Bluebell BC323TR/S - Singlemode 3G/SDI, HD/SDI
738.43 CHF Inc. VAT
-
Delivery
- Shipped in 2 to 3 weeks
-
In-store pickup
- Available in 2 to 3 weeks
The BC323TR is a transceiver module that converts a 3G-SDI, HD-SDI, SD-SDI and ASI signal into an optical cable, and a separate fibre signal into an electrical signal. Each incoming signal is automatically detected, then equalised and re-clocked before conversion and transmission via a separate optical fibre/BNC. Each BC323TR is housed in a compact and robust enclosure, designed for outside broadcasts and special events as well as studio use. Power is supplied via the optional PS12 unit sold separately. The PS12 features an IEC mains input allowing easy adoption into standard equipment racks. The BC323TR is fitted with a 4-pin XLR allowing power from various external DC sources in the range of 4.5 to 17 V. The BC323TRs are extremely compact dual-channel fibre optical converters, ideally suited to provide interference-free transmission and to extend the range of electrical signals, in particular HD-SDI and 3G-SDI signals. Each channel can operate in non-re-clocked mode and handles data rates from 50 Mb/s to 3 Gb/s. The BC323TR is available in single-mode, WDM and CWDM versions to suit any fibre application. The BC323TR can also be used to interface with any standard Bluebell card or enclosure. Features - 3G-SDI, HD-SDI, SD-SDI, ASI optical <-> electrical transceiver - Handles data rates from 50 Mb/s to 3 Gb/s - Re-clocks the signal - 4-pin XLR power connection - Single-mode, WDM and CWDM versions available - Compact and robust enclosure
|
|
Specifications |
|
|
Electrical input |
|
|
|
Standards |
SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE 297M, DVB-ASI |
|
|
Equalisation |
Automatic up to 100 m @ 3 Gb/s Automatic up to 200 m @ 1.485 Gb/s Automatic up to 300 m @ 270 Mb/s The equaliser and re-clocker can be bypassed to support data rates up to 50 Mb/s |
|
|
Connector |
1 x BNC 75 Ohm compliant with IEC 60169-8 Amendment 2 per channel |
|
|
Return loss |
> 15 dB @ 1.485 Gb/s |
|
|
Format |
Re-clocked (with bypass to support data rates up to 50 Mb/s) |
|
|
Electrical output |
|
|
|
Standards |
SMPTE 424M, SMPTE 292M, SMPTE 259M, SMPTE297M, DVB-ASI Automatic rate selection for 3G-SDI, HD-SDI and SD-SDI data rates |
|
|
Connector |
1 x BNC 75 Ohm compliant with IEC 60169-8 Amendment 2 |
|
|
Return loss |
> 15 dB @ 1.485 Gb/s |
|
|
Polarity |
1 x non-inverted output, 1 x inverted output |
|
|
Signal level |
800 mV +/- 10% |
|
|
DC offset |
0 +/- 0.5 V |
|
|
Jitter |
<0.15 UI equalised line |
|
|
Format |
Re-clocked (with bypass to support data rates up to 50 Mb/s) |
|
|
Optical output |
|
|
|
Connector |
1 x standard female LC per channel |
|
|
Wavelength |
1310 nm, 1550 nm |
|
|
Optical power |
-2 dBm @ 1310 nm (typical) -2 dBm @ 1510 nm (typical) 0 dBm @ CWDM (typical) |
|
|
General |
|
|
|
Depth |
60 mm |
|
|
Width |
20 mm 4TE |
|
|
Height |
129 mm (3RU) |
|
|
Weight |
100 g |
|
|
Operating temperature |
-30 to +70 ºC |
|
|
Power supply |
2.5 W |
|
|
Signal detection |
LED illuminated on loss of signal |
|
|
Compliance |
|
|
|
EMI/RFI |
Compliant with 89/336/EEC |
|
|
Electrical |
Compliant with EN 61000-6-1, EN61000-6-2 |
|
|
Laser safety |
Compliant with Class 1 laser product 24 CFR 1040.10 & 1040.11 |
|
|
RoHS |
Compliant with Directive 2002/95/EC |
|
|
Optical input |
|
|
|
Connector |
1 x standard female LC |
|
|
Wavelength |
1270-1610 nm |
|
|
Sensitivity |
> -25.0 dBm @ 3 Gb/s> -25.5 dBm @ 1.485 Mb/s> -26.0 dBm @ 270 Mb/s |
|
|
Max input power |
> -1 dBm |
|
|
Data rate |
50 Mb/s to 3 Gb/s |
