Rode - Stereo Microphone
Rode TF5-MP - Stereo Microphone
1,117.34 CHF Inc. VAT
-
Delivery
- Shipped in 1 to 2 weeks
-
In-store pickup
- Available in 1 to 2 weeks
Created in collaboration with renowned classical music producer/engineer Tony Faulkner, the Rode TF-5 MP Black is a matched pair of small-diaphragm cardioid condenser microphones optimised for sonic transparency, precise stereo imaging and discreet placement. Whether you are recording orchestral instruments, piano, acoustic guitar, percussion or drums, the TF-5 MP can accurately reproduce the variable timbre and dynamic range of your source.
The precision capsule of each microphone uses a cardioid polar pattern to improve directivity and reduce ambience. Thanks in particular to JFET active electronics, the microphones can handle high SPL levels up to 120 dB while offering a wide, flat frequency response with low noise. Powered by 48 V phantom power, the microphones are not subject to performance degradation caused by flat batteries.
Mount both TF-5 microphones on a single microphone stand via the supplied mic clips and the SB20 stereo bar, which includes angle/measurement indicators for ORTF and X/Y configurations. The compact, lightweight microphone bodies ensure a balanced installation with a variety of microphone stands, from the most compact to the most robust. Windshields are included to reduce wind or HVAC noise.
Features
- Matched small-diaphragm condenser microphones
- Precision design in collaboration with producer/engineer Tony Faulkner
- Ideal for close miking of individual instruments, overhead miking of drums/percussion, or distant miking of ensembles or orchestras
- JFET impedance converter with bipolar output buffer
- Low noise of 14 dBA
- Compact for easy installation in confined spaces
|
|
Specifications |
|
|
Microphone |
|
|
|
Sound field |
Mono |
|
|
Operating principle |
Pressure gradient |
|
|
Capsule |
Condenser |
|
|
Directivity |
Cardioid |
|
|
Circuitry |
Solid-state |
|
|
Attenuator |
None |
|
|
High-pass filter |
None |
|
|
Performance |
|
|
|
Frequency range |
20 Hz to 20 kHz |
|
|
Maximum SPL |
120 dB SPL |
|
|
Impedance |
63 ohms |
|
|
Sensitivity |
-29 dBV/Pa at 1 kHz |
|
|
Dynamic range |
112.6 dB |
|
|
Signal-to-noise ratio |
80 dB |
|
|
Equivalent noise level |
14 dB A-weighted |
|
|
Connectivity |
|
|
|
Output connectors (analogue) |
1 x 3-pin XLR |
|
|
Power supply |
|
|
|
Operating voltage |
48 V |
|
|
Operating current consumption |
7 mA |
|
|
Physical characteristics |
|
|
|
Dimensions |
ø : 0.79 x L : 3.89" / ø : 20 x L : 98.7 mm |
|
|
Weight |
4.02 oz / 114 g |