Control your lens wirelessly with precision using the Chrosziel MN-300 MagNum 3-Axis Wireless Lens Control System. This version of the kit is supplied without motors, so you will need to provide your own digital motors with 7-pin connections. Your motors connect to the included receiver and extension module using the supplied cabling. A battery, antennas and straps for the hand-held unit are also included. The zoom rocker attaches to the rear of the hand-held unit allowing smooth and ergonomic control of the zoom axis. For transport and storage, the kit fits perfectly into the included hard case.,,,MagNum 200 2-Channel Wireless Manual Control Unit,,The Chrosziel MagNum 200 2-channel hand-held unit for the MagNum wireless lens control system can remotely control focus and iris. Focus is controlled by a soft-damped manual knob. Hard stops can be set along the focus rotation for focus marks. The iris is controlled by a linear slider on an aluminium scale. Compact in size, the transmitter has a rounded handle with a finger grip at the rear so you can hold it firmly during use. The transmitter houses an internal 2.4 GHz antenna and a BNC connector that will accept an external 434 MHz antenna. To avoid radio interference issues, there is a built-in spectrum analyser that can determine the best transmission frequency. Menu navigation is via an easy-to-read OLED display and membrane directional keys. A BNC antenna for 430 MHz operation and a wrist strap are included with this transmitter.,,,MagNum 200 2-Channel Wireless Lens Control Receiver,,With two dual outputs, the Chrozsiel MagNum 200 two-channel wireless lens control receiver can drive up to two motors that connect via LEMO 7-pin. The receiver is capable of calibrating motors on the lens without the aid of the transmitter. When connected to a camera via a serial output, start/stop can be controlled remotely from the transmitter. The MagNum 200 system can operate on 2.4 GHz and 430 MHz frequencies to ensure the greatest possible working distance and optimal reliability. The 2.4 GHz antenna is built-in and a 430 MHz BNC antenna is included. The receiver can be used in a wired/studio configuration to drive motors with ENG control input. Using Aladin expansion modules, which mount on the receiver body, the MagNum system can control up to four motors in total.,,,MagNum Extension Module,,Adding the Chrosziel MagNum Extension Module to the MagNum 200 receiver extends the MagNum system to become a fully functional 3-axis lens control solution for focus, iris and zoom. The extension module features a LEMO 7-pin connection for a digital motor and a Hirose 12-pin connection for connecting to ENG cameras for iris control and VTR/talkback control.,,,Zoom Rocker for MagNum MN-200/150,,The Chrosziel Zoom Rocker is designed for use with the MagNum MN-150T expandable transmitter or the MN-200T expandable transmitter with antenna. It includes a personal code to activate the zoom software module.,,Compatibility,,- MagNum MN-150T expandable transmitter (2016 models or later),,- MagNum MN-200T expandable transmitter with antenna (2016 models or later),,,MagNum MN-BAT Remote Control Battery,,The MagNum MN-BAT Remote Control Battery is a rechargeable Li-Ion battery for the MagNum wireless lens control unit and recharges with the MN-CH battery charger (not included).,,- Also compatible with Sony NP-FM50/55 cameras,,,MagNum MN-CH Battery Charger,,The Chrosziel MN-CH MagNum Battery Charger is a charger for MF-50 type batteries used with the MagNum wireless lens control. The charger can be used worldwide on any power source, as well as on the 12 VDC car cigarette lighter socket. The MN-CH includes cables for US, UK, European and car sockets.,,,Padded Neck Strap for Lens Control Transmitters (Black),,The Chrosziel Padded Neck Strap is an elastic strap with the Chrosziel logo designed for your LCS transmitter. It offers maximum comfort for minimum weight when carrying your transmitter.,,,LEMO 7-Pin Digital Motor Cable for AL2/Magnum (23"),,Connect a motor to your Chrosziel Aladin or Magnum wireless focus receiver with the MODT60 LEMO 7-pin motor cable. The motor cable is compatible with Heden M26VE, BTM, Scorpio SB92 and Preston DM2 digital motors.,,,AB D-Tap to MagNum Lemo 5-Pin 12V Power Cable,,The Chrosziel AB D-Tap to MagNum Lemo 5-Pin 12V Power Cable is a power cable designed for use with the MagNum camera and lens remote control. The Anton Bauer AB D-tap connector cable powers the MagNum remote control via the Lemo 5-pin connector.,,,MN-RMB1 Mounting Bracket for MagNum Receiver,,The Chrosziel MN-RMB1 Mounting Bracket for MagNum Receiver is designed to mount a MagNum receiver on a camera cold or hot shoe. It is compatible with MagNum MN-100R and MN-200R receivers. The bracket is attached to the receiver via 2 locking screws.,,,Case for MagNum LCS Remote Control,,The Chrosziel Case for MagNum LCS Remote Control is a hard case for the MagNum camera and lens remote control. It is designed to hold the unit as well as a motor, clamping bracket for 15 and 19 mm rods, all motor cables, a power cable with D-Tap connector and its components. The case includes a foam insert to protect the MagNum lens control unit.,,,,Specifications,,

MagNum 200 2-Channel Wireless Manual Control Unit

MagNum 200 2-Channel Wireless Lens Control Receiver

Zoom Rocker for MagNum MN-200/150

MagNum MN-BAT Remote Control Battery

MagNum MN-CH Battery Charger

LEMO 7-Pin Digital Motor Cable for AL2/Magnum (23")

AB D-Tap to MagNum Lemo 5-Pin 12V Power Cable

MN-RMB1 Mounting Bracket for MagNum Receiver

Case for MagNum LCS Remote Control