Control your lens wirelessly with precision using the Chrosziel MN-300 MagNum 3-Axis Wireless Lens Control System. This kit version comes with 3 compact Chrosziel digital motors for interfacing with your lens of choice. Your motors connect to the included receiver and expansion module using the supplied cabling. A battery, antennas, and straps for the hand unit are also included. The zoom rocker attaches to the rear of the hand unit enabling smooth and ergonomic control of the zoom axis. For transport and storage, the kit fits perfectly into the included hard case.



MagNum 200 2-Channel Wireless Hand Unit

The Chrosziel 2-channel MagNum 200 hand unit for the MagNum wireless lens control system can remotely control focus and iris. Focus is controlled by a hand wheel with fluid damping. Hard stops can be set along the focus rotation for focus marks. Iris is controlled by a linear slider on an aluminium scale. Compact, the transmitter features a rounded handle with a finger grip at the rear for secure handling during use. The transmitter incorporates an internal 2.4 GHz antenna and a BNC connector that will accept an external 434 MHz antenna. To avoid radio interference issues, there is a built-in spectrum analyser that can determine the best transmission frequency. Menu navigation is via an easy-to-read OLED screen and membrane directional keys. A BNC antenna for 430 MHz operation and a cord are included with this transmitter.


MagNum 200 2-Channel Wireless Lens Control Receiver

With two outputs, the Chrozsiel MagNum 200 2-channel wireless lens control receiver can drive up to two motors that connect via LEMO 7-pin. The receiver is capable of calibrating motors to the lens without assistance from the transmitter. When connected to a camera via a serial output, start/stop can be remotely controlled from the transmitter. The MagNum 200 system can operate on 2.4 GHz and 430 MHz frequencies to ensure the greatest possible working distance and reliability. The 2.4 GHz antenna is integrated and a 430 MHz BNC antenna is included. The receiver can be used in a wired/studio configuration to drive motors with ENG control input. By using Aladin expansion modules, which can be mounted on the receiver body, the MagNum system can control up to four motors in total.


MagNum Expansion Module

By attaching the Chrosziel MagNum expansion module to the MagNum 200 receiver, you extend the MagNum system into a fully functional 3-axis lens control solution for focus, iris, and zoom. The expansion module features a LEMO 7-pin connection for a digital motor and a Hirose 12-pin connection for connecting to ENG cameras for iris control and VTR/intercom control.


Zoom Rocker for MagNum MN-200/150

The Chrosziel zoom rocker is designed for use with the MagNum MN-150T expandable transmitter or the MN-200T expandable transmitter with antenna. It includes a personal code to activate the zoom software module.

Compatibility

MagNum MN-150T expandable transmitter (2016 models or later)

MagNum MN-200T expandable transmitter with antenna (2016 models or later)


MagNum MN-BAT Battery

The MagNum MN-BAT battery is a rechargeable Li-Ion battery for the MagNum wireless lens control unit and recharges with the MN-CH battery charger (not included).

- Also compatible with Sony NP-FM50/55 cameras


MagNum MN-CH Battery Charger

The Chrosziel MN-CH MagNum battery charger is a charger for MF-50 batteries used with the MagNum wireless lens control. The charger can be used worldwide on any power source, as well as on the 12 VDC car cigarette lighter socket. The MN-CH includes cables for US, UK, Europe, and car sockets.


Padded Neck Strap for Lens Control Transmitters (Black)

The Chrosziel padded neck strap is an elastic strap with the Chrosziel logo designed for your LCS transmitter. It offers maximum comfort with minimal weight when carrying your transmitter.


CDM-100 Digital Motor

Designed for stabiliser and drone configurations, the Chrosziel CDM-100 digital motor is small at only 19 mm in diameter and features a built-in 69 cm LEMO 1B 7-pin cable for connection to Chrosziel FIZ systems. As this motor uses a horizontal design and integrated cable, it can be kept to a low profile when size and weight, or their absence, are of paramount importance. This motor includes a 19 mm clamp with a 15 mm adapter for LWS compatibility and two MOD 0.8 gears; one 4 cm and one 6 cm in diameter to compensate for recessed lens control rings.


LEMO 7-pin Digital Motor Cable for AL2/Magnum (58 cm)

Connect a motor to your Chrosziel Aladin or Magnum wireless focus tracking receiver with the MODT60 LEMO 7-pin motor cable. The motor cable is compatible with Heden M26VE, BTM, Scorpio SB92, and Preston DM2 digital motors.


12V Power Cable AB D-Tap to MagNum Lemo 5-pin

The Chrosziel AB D-Tap to MagNum Lemo 5-pin 12V power cable is a power cable designed for use with the MagNum camera and lens remote control. The Anton Bauer AB D-tap connector cable powers the MagNum remote control via the Lemo 5-pin connector.


MN-RMB1 Mounting Bracket for MagNum Receiver

The Chrosziel MN-RMB1 mounting bracket for MagNum receiver is designed to mount a MagNum receiver on a cold or hot camera shoe. It is compatible with MagNum MN-100R and MN-200R receivers. The bracket is attached to the receiver via 2 locking screws.


LCS MagNum Remote Control Case

The Chrosziel MagNum LCS remote control case is a hard case for the MagNum camera and lens remote control. It is designed to accommodate the unit with one motor, a clamp holder for 15 and 19 mm rods, all motor cables, the power cable with D-Tap connector, and its components. The case includes a foam insert to protect the MagNum lens control unit.



Specifications




MagNum 200 2-Channel Wireless Hand Unit

MagNum 200 2-Channel Wireless Lens Control Receiver

Zoom Rocker for MagNum MN-200/150

MagNum MN-BAT Battery

MagNum MN-CH Battery Charger

CDM-100 Digital Motor

LEMO 7-pin Digital Motor Cable for AL2/Magnum (58 cm)

12V Power Cable AB D-Tap to MagNum Lemo 5-pin

MN-RMB1 Mounting Bracket for MagNum Receiver

LCS MagNum Remote Control Case