Symetrix - Prism 4x4
Symetrix 80-0114-B - Prism 4x4
3,066.34 CHF Inc. VAT
-
Delivery
- Shipped in 2 to 3 weeks
-
In-store pickup
- Available in 2 to 3 weeks
Dante in Our DNA
Prism DSPs offer 128 Dante channels (64×64). The Dante protocol enables ultra-reliable multichannel audio networking over IP. Together, Symetrix and Dante provide the fastest solution for implementing, controlling and maintaining a networked DSP system and its accessories – including Dante-compatible third-party microphones, loudspeakers, power amplifiers and mixing consoles.
Scalability
The number of analogue inputs and outputs in a Prism system can be expanded by using the Symetrix Dante analogue I/O expanders xIn 4, xIO 4×4, xOut 4, xIn 12 and xOut 12.
Unlimited Programming Flexibility
Prism is programmed with Composer – Symetrix's award-winning open-architecture CAD application. What is unique to Composer is the ability to natively configure Symetrix Dante hardware and certain third-party Dante hardware – eliminating the confusion of multiple or redundant software applications. Learn more about Composer here.
Simplified Control
Multiple control options include Symetrix's cost-effective ARC wall panels and the easy-to-generate SymVue virtual Windows GUI. Composer's human-readable control protocol supports programming of touchscreens and third-party control devices.
Built-in Web Server for Status and Even More Control
Prism's built-in web server displays I/O levels, diagnostic data and hosts ARC-WEB – a browser-based interface for smartphones, tablets and computers.
Form, Fit and Function
The Prism 8×8, 12×12 and 16×16 were designed with standard 19" x 1U enclosures. For convenient on-site or rack mounting, the Prism 0×0 and 4×4 feature a 1U half-rack format.
Features
- Revolutionary DSP price/performance ratio
- 128 Dante channels (64×64)
- 0×0, 4×4, 8×8, 12×12 and 16×16 versions
- Identical DSP processing to Radius / Edge / Solus NX
- Identical delay memory to Radius / Edge / Solus NX
|
|
Specifications |
|
|
Analogue inputs |
|
|
|
Number of inputs |
Four (4) switchable balanced microphone or line inputs. |
|
|
Connectors |
3.81 mm terminal blocks. |
|
|
Nominal input level |
+4 dBu. |
|
|
Maximum input level |
+23 dBu. |
|
|
Microphone preamplifier gain |
0, 12, 24, 44 or 54 dB switchable with ± 24 dB adjustment. |
|
|
Microphone preamplifier equivalent input noise (EIN) |
< -125 dB with 150 ohm source impedance. BW 22.4 kHz. |
|
|
CMRR |
> 79 dB @ 1 kHz, unity gain. |
|
|
Input impedance |
8k Ohms balanced, 4k Ohms unbalanced. |
|
|
Phantom power (per input) |
+48 VDC, 10 mA maximum. |
|
|
Dynamic range |
> 113 dB, A-weighting. |
|
|
THD+Noise |
< -100 dB; BW 22.4 kHz, unweighted; 1 kHz @ +15 dBu with 0 dB gain. Gross gain adjusted to +4 dBu. |
|
|
A/D Latency |
0.28 ms. |
|
|
Mechanical |
|
|
|
Required space |
Half-rack (WxDxH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in x 9 in x 1.72 in) Depth does not include space for connectors. Allow at least 7.62 cm of additional clearance for rear panel connections. Additional depth may be required depending on your specific cabling and connections. |
|
|
Electrical |
PoE+ IEEE 802.3at Class 4, 25.5 Watts maximum. No mains voltage switching required. Note: Subject to change based on actual power requirements determination. |
|
|
Ventilation |
The recommended maximum ambient temperature is 30°C / 86°F. Ensure that the left and right sides of the equipment are not obstructed (minimum clearance of 5.08 cm, 2 inches). Ventilation must not be impeded by covering ventilation openings with objects such as newspapers, tablecloths, curtains, etc. |
|
|
Certifications and compliance |
Safety: UL 60065, cUL 60065, IEC 60065. EMC: "Class A" device (applies to all of the following) EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, FCC Part 15, ICES-003. Environment: RoHS. |
|
|
Analogue outputs |
|
|
|
Number of outputs |
Four (4) balanced line outputs. |
|
|
Connectors |
3.81 mm terminal blocks. |
|
|
Nominal output level |
+4 dBu with 20 dB of headroom. |
|
|
Maximum output level |
+24 dBu (+22.8 dBu into a minimum load of 2k Ohms). |
|
|
Output impedance |
300 Ohms balanced, 150 Ohms unbalanced. |
|
|
Dynamic range |
> 117 dB, A-weighting. |
|
|
THD+Noise |
< -97 dB; BW 22.4 kHz, unweighted; 1 kHz, 0 dB gain +8 dBu output. |
|
|
D/A Latency |
0.60 ms. |
|
|
System |
|
|
|
Sampling frequency |
48 kHz. |
|
|
Frequency response (A/D/A) |
20 Hz – 20 kHz, ± 0.5 dB. |
|
|
Dynamic range (A/D/A) |
> 113 dB, A-weighting. |
|
|
Channel separation (A/D/A) |
> 110 dB @ 1 kHz, +24 dBu. |
|
|
THD+Noise |
<-95 dB (BW 22.4 kHz, unweighted); 1 kHz @ +15 dBu with 0 dB gain. |
|
|
Latency (A/D/A) |
1.04 ms, inputs routed to outputs. |
|
|
Processors |
1 x Analog Devices SHARC 21489 @ 400 MHz SIMD. |
|
|
Gross processing capacity |
400 MIPS, 1.6 GFLOPS. |
|
|
Delay memory |
174 seconds mono. |
|
|
Analogue control inputs |
0–3.3 VDC. |
|
|
Recommended external control potentiometer |
10k Ohms, linear. |
|
|
Logic outputs |
Low (0V) when active, pulled high (5V) when inactive. |
|
|
Maximum external supply voltage for logic outputs |
24 VDC. |
|
|
Maximum switching current of the external power supply for logic outputs |
50 mA. |
|
|
Maximum output current for logic outputs |
10 mA. |
|
|
RS-485 serial I/O |
38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. Can be separated from the ARC port. |
|
|
Ethernet cable |
Standard CAT5e or CAT6, maximum length between devices = 100 metres. |
|
|
Dante cable |
Standard CAT6, maximum length between devices = 100 metres. |
|
|
ARC Cable |
Standard CAT5, load and number of devices dependent. Maximum available power 8 Watts. |
|
|
Maximum number of devices per system |
80 units per site file. |
|
|
Maximum number of stored presets |
1000 |
