Symetrix - xIO 4x4
Symetrix 80-0106-B - xIO 4x4
1,892.00 CHF Inc. VAT
-
Delivery
- Shipped in 2 to 3 weeks
-
In-store pickup
- Available in 2 to 3 weeks
For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O expanders use Composer for configuration. Using Composer eliminates switches, PCB jumpers and mechanical adjustments as well as the need for third-party software applications.
Features
- Designed for use with Dante-compatible Symetrix DSPs
- Software configuration via Composer
- Cost-effective solution to increase the system's analogue I/O capacity
- Ultra-low latency – No audible delay
- High-end specifications
- Half-rack format
- PoE – injectors included
- xIO 4×4 – 4 analogue mic/line inputs + 4 analogue outputs
|
|
Specifications |
|
|
Analogue inputs |
|
|
|
Frequency response |
20 Hz – 20 kHz, ± 0.5 dB |
|
|
Channel separation |
> 111 dB @ 1 kHz, +24 dBu |
|
|
Connectors |
Phoenix® 3.5 mm connectors |
|
|
Number of inputs |
Four (4) balanced inputs switchable between mic or line level |
|
|
Nominal input level |
+4 dBu with 20 dB safety margin |
|
|
Maximum input level |
+23 dBu |
|
|
Microphone preamplifier gain |
0, 11.8, 24, 44 or 54 dB switchable |
|
|
Microphone preamplifier equivalent input noise |
< -127 dB with 150 ohm source impedance |
|
|
CMRR |
> 76 dB @ 1 kHz, unity gain |
|
|
Input impedance |
8k Ohms balanced, 4k Ohms unbalanced |
|
|
Phantom power (per input) |
+48 VDC @ 10 mA maximum |
|
|
Dynamic range |
> 116 dB, A-weighted |
|
|
THD + Noise |
< -100 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain |
|
|
Latency |
0.28 ms |
|
|
Analogue outputs |
|
|
|
Frequency response |
20 Hz – 20 kHz, ± 0.5 dB |
|
|
Channel separation |
> 111 dB @ 1 kHz, +24 dBu |
|
|
Connectors |
Phoenix® 3.5 mm connectors |
|
|
Number of outputs |
Four (4) balanced line-level outputs |
|
|
Nominal output level |
+4 dBu with 20 dB safety margin |
|
|
Maximum output level |
+24 dBu (+22.8 dBu at minimum 2k Ohm load) |
|
|
Output impedance |
300 Ohms balanced, 150 Ohms unbalanced |
|
|
Dynamic range |
> 118 dB, A-weighted |
|
|
THD + Noise |
< -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain |
|
|
Latency |
0.60 ms |
|
|
Mechanical |
|
|
|
Space required |
Half-rack (W x D x H: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in x 9 in x 1.72 in) Depth does not include space for connectors. Allow at least 7.62 cm (3 inches) of additional clearance for rear panel connections. Additional depth may be required depending on your specific cabling and connections. |
|
|
Electrical |
PoE IEEE 802.3af Class 0, 10 Watts maximum. No mains voltage switching required (100-250 VAC, 50-60 Hz) |
|
|
Ventilation |
The recommended maximum ambient temperature is 30°C / 86°F. Ensure that the left and right sides of the equipment are not obstructed (minimum clearance of 5.08 cm, 2 inches). Ventilation must not be impeded by covering the ventilation openings with objects such as newspapers, tablecloths, curtains, etc. |
|
|
Certifications or compliance |
UL 60065, cUL 60065, IEC 60065, FCC 15.109:2015, FCC 15.109(g):2015, FCC 15.107:2015, (CISPR 32), EN 55032:2012, EN 55103-2:2009, EN 61000-3-3:2013, EN 61000-3-2:2006, ICES-003:2012, RoHS |
|
|
System |
|
|
|
Sampling frequency |
48 kHz, ± 100 ppm |
|
|
Dante cable |
Standard CAT6, maximum length between devices = 100 metres |
